Water2Buy softener regenerates too often, wasting salt and water

Safety first: No internal water work is required for initial checks.

• Check hardness setting: Compare programmed hardness with actual tested hardness. Reduce the setting if it is significantly higher than reality.
• Review capacity: Ensure the resin capacity matches your Water2Buy model. Increase capacity setting if it was set too low.
• Check for leaks: Inspect household plumbing for running toilets, dripping taps, or leaks that could cause continuous flow through the meter.
• Flow meter test: With all taps closed, check if the controller still shows flow. If so, the flow meter may be faulty and should be replaced.