Waterguy Flow Restriction Through Softener

Softener causes noticeable drop in water pressure throughout the house

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Clogged inlet screen, Fouled resin bed with iron or sediment, Partially closed bypass valve, Undersized plumbing or control valve for flow demand

Safety first: Turn off power and depressurize before removing screens or opening the valve.

Check bypass position: Ensure the Waterguy bypass is fully in SERVICE, not partially closed.
Clean inlet screen: Remove and rinse the inlet screen at the control valve to clear sediment.
Backwash resin: Run a manual regeneration and ensure a strong backwash flow. If backwash is weak, the drain or valve may be restricted.
Resin condition: If pressure remains low, the resin bed may be fouled and require cleaning with a resin cleaner or replacement.

Medium 3/5

Waterguy Control Valve Inlet Screen

Check Price on Amazon

We may earn a commission from links on this page.