Safety: Unplug the wine cooler before removing the control panel.

Clean and dry the panel: If the control panel is damp or has residue, gently wipe it with a soft, dry cloth. Do not spray cleaner directly onto the panel.
Remove control panel: Take out screws or release clips holding the panel, then carefully pull it forward, watching for attached wiring.
Inspect ribbon cable: Check the keypad ribbon cable for cracks, kinks, or corrosion at the connectors. Reseat the cable firmly at both ends.
Check for corrosion: Look for green or white corrosion on the keypad or UI board. If present, replacement is usually required.
Replace keypad/UI board: If buttons remain unresponsive or F1 persists, install a new user interface or keypad assembly designed for the specific Amana wine cooler model.
Reassemble and test: Reinstall the panel, restore power, and verify that all buttons respond and the F1 code is cleared.

Wine cooler displays F1 and will not accept temperature changes

Possible Causes