Safety: Unplug the wine cooler before cleaning or servicing the rear components.

Ensure proper ventilation: Verify that the wine cooler has the required clearance around the sides, back, and top per Amana installation instructions. Move it away from walls or cabinets if necessary.
Clean condenser coil: Remove the rear lower panel and use a vacuum and soft brush to remove dust and lint from the condenser coil and surrounding area.
Check condenser fan: Confirm that the condenser fan spins freely and runs when the compressor is on. If it is seized, noisy, or not running, replace the condenser fan motor.
Inspect for overheating: Look for signs of overheating on the compressor and wiring (discoloration, melted insulation). If present, discontinue use and contact a technician.
Reset and test: After cleaning and any fan replacement, restore power and monitor operation. If F3 recurs and the compressor is very hot or noisy, there may be a sealed system or compressor issue requiring professional service.

Wine cooler displays F3 and unit may shut down unexpectedly

Possible Causes