Water pooling at the bottom of the wine cooler or leaking onto the floor.

Safety: Unplug the cooler before working inside. Wipe up any water to avoid slipping.

• Locate drain hole: Inside the cabinet, usually at the rear near the bottom, find the small drain hole that leads to the condensate pan.
• Clear blockage: Use a soft pipe cleaner, cotton swab, or flexible plastic strip to gently clear any debris or mold from the drain hole.
• Check drain tube and pan: From the rear, locate the drain tube leading to the evaporator pan above the compressor. Ensure it is not kinked or disconnected. Clean the pan if dirty.
• Level the unit: Use a level to ensure the cooler is slightly tilted back so water flows to the drain. Adjust the front leveling feet as needed.
• Inspect door gasket: Replace the door gasket if warm air infiltration is causing excessive condensation.