Wine cooler vibrates excessively and may cause bottles to rattle.

Safety: No internal electrical work is required; unplug only if moving the unit significantly.

• Level the unit: Adjust the front leveling feet until the cooler is stable and does not rock.
• Check clearances: Ensure the sides and back are not tightly pressed against cabinets or walls. Provide a small gap to prevent vibration transfer.
• Use vibration pads: Place anti-vibration pads or a rubber mat under the feet to dampen noise.
• Secure shelves: Make sure all shelves and racks are fully seated and not loose.
• Inspect compressor mounts: If vibration is severe, check the compressor mounting grommets at the rear and replace if hardened or missing.