Arctic King Compressor Start Failure

Unit emits a clicking sound repeatedly but does not start cooling.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed start relay, Overloaded compressor, Low line voltage

Safety: Unplug before servicing.

Steps:

Check voltage and extension cords: Plug the unit directly into a properly grounded outlet. Avoid extension cords.
Inspect start relay: Remove the compressor cover and check the start relay and overload. Replace if it rattles when shaken or shows burn marks.
Allow compressor to cool: If very hot, let it cool for 30–60 minutes before retrying.

Professional help: If a new relay does not fix the issue, the compressor may be locked and require replacement by a technician.

Hard 4/5

Compressor Start Relay and Overload Protector

Check Price on Amazon

We may earn a commission from links on this page.