BODEGA43 No Power / Dead Appliance

Wine cooler does not power on at all; display is dark and no fans or compressor noise.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown internal fuse on main PCB, Faulty power cord, Defective main control board, Tripped household circuit or faulty outlet

How to Fix / Troubleshooting

Safety: Before opening any panels, unplug the unit and verify the outlet is not live with a tester.

Checks:

  • Outlet and breaker: Test the outlet with another device. Reset any tripped breakers or GFCI outlets.
  • Power cord: Inspect the BODEGA43 power cord for cuts, kinks, or burn marks. Replace if damaged.
  • Internal fuse: Remove the rear panel to access the main control board. Many boards include a small glass or ceramic fuse. Test for continuity; replace with the same rating if blown.
  • Board inspection: Look for burnt components or cracked solder joints. If the fuse blows again immediately, there is likely a short on the board or compressor circuit.

Resolution: If the cord and fuse are good but the unit remains dead, replace the main control board. If you are not comfortable working with mains voltage, contact a technician.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Main Control Board (PCB)
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements