Bosch Intermittent Control or Sensor Fault

Wine cooler cools intermittently, sometimes warm, sometimes correct temperature

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose sensor connector, Intermittent main control board, Failing compressor start relay, Overheating due to poor ventilation

How to Fix / Troubleshooting

Safety: Disconnect power before inspecting internal components.

Steps:

  • Check installation: Ensure proper ventilation and that the unit is not exposed to direct sunlight or heat sources.
  • Inspect connectors: Access the main control board and gently reseat all connectors, especially those from temperature sensors and the compressor.
  • Observe operation: After reassembly, monitor the unit over 24–48 hours. Note if the compressor fails to start at times, which may indicate a failing start relay.
  • Replace suspect parts: If tapping the control area causes the unit to start/stop, the control board may have cracked solder joints and should be replaced.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Main Control Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements