Display shows CL and controls do not respond to touch; unit continues to run at last set temperature.

Safety first: No internal repair is needed for the lock feature, but always unplug the unit before removing the control panel if you suspect a stuck button.

CL usually indicates the control lock is turned on.

• Step 1 – Unlock controls: Press and hold the designated lock key (often the "Lock" or a combination such as "Up" and "Down" arrows) for 3–5 seconds until CL disappears. Refer to the Café user manual for the exact key sequence.
• Step 2 – Check for stuck buttons: If CL will not clear, inspect the control panel for a button that feels stuck or does not click. Gently work the button to free it.
• Step 3 – Power reset: Unplug the unit for 5 minutes, then plug it back in and attempt to unlock again.
• Step 4 – Replace control panel: If the lock cannot be cleared and buttons are unresponsive, the control panel (UI) may be defective and should be replaced with a Café-compatible assembly.

Do not pry aggressively on the touch panel surface; this can crack the glass or damage the electronics.