Door does not close properly or pops open slightly after closing.

Safety: Unplug the unit before adjusting hinges to avoid accidental fan/compressor operation while working.

Steps:

• Check for obstructions: Ensure shelves and bottles are not protruding and hitting the door.
• Level the unit: Adjust leveling feet so the front is slightly higher than the rear, encouraging the door to self-close.
• Inspect hinges: Tighten hinge screws and adjust the door position so it is square with the cabinet.
• Check gasket: Inspect the door gasket for twists or gaps. Warm the gasket gently with a hair dryer and reshape if needed. Replace if torn or permanently deformed.