E7
Costway
Low Voltage or Power Supply Error
Wine cooler shows E7 and interior light or fan may not operate correctly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective internal power supply on main board, Loose AC power cord connection, Tripped surge protector or unstable outlet voltage, Shorted low-voltage load (fan, LED driver)
How to Fix / Troubleshooting
Safety: Always unplug the unit before opening any panels. Use a properly grounded outlet.
Steps:
- Verify power source: Plug the cooler directly into a wall outlet (no extension cords). Test the outlet with another appliance to confirm stable power.
- Inspect power cord: Check the power cord for cuts, burns, or kinks. Replace if damaged.
- Check internal connections: Remove the rear panel and verify that the power cord is firmly connected to the main control/power board.
- Look for shorts: Inspect internal fans, LED light harnesses, and other low-voltage components for melted insulation or signs of shorting. Disconnect suspect loads and see if E7 clears.
- Replace power/control board: If the power supply section of the main control board is visibly damaged or not providing correct voltages (requires meter), replace the board.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements