EC
Danby
Sealed System / Refrigeration Circuit Error (often low refrigerant or compressor fault)
Display shows EC and unit is not cooling or cooling very poorly
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Refrigerant leak in evaporator or condenser, Weak or failed compressor, Blocked capillary tube, Overheated compressor due to poor ventilation
How to Fix / Troubleshooting
Critical safety: Sealed system repairs involve refrigerant and must be performed by a licensed refrigeration technician. Do not attempt to open the sealed system yourself.
- Basic checks: Ensure the unit has adequate clearance around the sides and back for ventilation. Clean dust from condenser coils and vents.
- Listen for compressor: When cooling is demanded, the compressor should run with a low hum. If it repeatedly clicks on and off, the compressor or start device may be failing.
- Check for frost pattern: With the interior panel removed, a healthy system will show even frost across most of the evaporator. Frost only at the inlet or no frost at all suggests a sealed system issue.
- Do not add refrigerant yourself: Danby wine coolers use specific refrigerants and charge amounts. Improper handling can be dangerous and illegal.
- Contact service: If EC persists after cleaning and verifying ventilation, schedule a professional technician to diagnose the sealed system.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements