Danby
No Power / Dead Unit
Wine cooler does not power on at all; display and lights are off
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on control board, Faulty power cord, Failed main control PCB, Tripped household breaker or bad outlet
How to Fix / Troubleshooting
Safety: Always verify the outlet is not live before touching bare wires. Unplug the unit before opening any panels.
- Check external power: Test the wall outlet with another device. Reset any tripped breakers or GFCI outlets.
- Inspect power cord: Look for cuts, kinks, or burn marks. If damaged, replace the cord or have it replaced by a qualified technician.
- Access control board: Remove the rear or top panel to reach the main PCB. Look for an onboard fuse; test it with a multimeter and replace with the same rating if blown.
- Check for burnt components: If the board shows heavy damage, replace the entire main control PCB.
- Reassemble and test: After replacing fuse or board, restore power and verify that the display and interior light come on.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements