E7
Della Marta
Condenser Fan Motor Fault
Display shows E7 and the condenser fan (rear fan) does not run, causing poor cooling and hot sides.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Fan blocked by dust or debris, Loose or burnt fan connector, Main control PCB fan output failure
How to Fix / Troubleshooting
Safety: Unplug the cooler before accessing the rear compartment.
- Access condenser fan: Remove the rear lower panel to expose the condenser coil and fan.
- Clean and inspect: Vacuum dust from the condenser coil and fan blades. Ensure the fan spins freely by hand.
- Check wiring: Confirm the fan connector is tight and wires are not cut or melted.
- Replace fan motor: If the motor is seized or tests open with a multimeter, replace it with a Della Marta condenser fan motor. Reinstall the fan blade and ensure correct airflow direction (blowing through the condenser).
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements