Della Marta Upper Zone Evaporator Fan Fault

Display shows F3 and the upper zone fan does not run or is very noisy.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed upper zone fan motor, Ice buildup around fan, Loose fan connector, Obstructed fan blade by wiring or insulation

Safety: Unplug the unit before removing interior panels.

Access upper fan: Remove upper zone shelves and the rear interior panel to expose the fan.
Clear obstructions: Remove ice, foam, or wiring blocking the fan. Ensure the blade spins freely.
Check connector: Reseat the upper fan connector on the fan and on the dual-zone control PCB.
Replace fan: If the motor is seized or tests open, install a new Della Marta upper zone evaporator fan motor.

Medium 3/5

Upper Zone Evaporator Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.