Condensation or frost forming on the inside of the glass door.

Safety: No internal electrical work is required for basic checks.

Steps:

• 1. Inspect gasket: Check the door gasket for tears, gaps, or hardened sections. Close the door on a strip of paper around the perimeter; if it pulls out easily, the seal is weak.
• 2. Adjust door alignment: Tighten or adjust hinges so the door closes squarely against the cabinet.
• 3. Replace gasket: If damaged, warm the new Electrolux gasket in hot water to make it flexible, then press it into the door channel, ensuring a full seal.
• 4. Control room humidity: Use a dehumidifier in very humid environments to reduce condensation on the glass.