Electrolux
No Power to Control – Internal Fuse or Board Failure
Control panel is completely unresponsive; no lights or display, but outlet has power.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on control board, Failed main control board power supply, Loose power cord connection inside junction box, Damaged power cord
How to Fix / Troubleshooting
Safety: Unplug the wine cooler before opening any electrical compartments. High voltage is present.
Steps:
- 1. Confirm outlet power: Test the outlet with another device.
- 2. Inspect power cord: Check for visible damage along the cord and at the plug.
- 3. Access control board: Remove the control board cover and look for an onboard fuse. If blown, determine and correct the cause before replacing with the same rating.
- 4. Replace control board: If the fuse is intact but the board shows no signs of life, replace the Electrolux main control board.
Warning: If you are not experienced with electrical safety, have a professional perform these checks.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements