E14
Electrolux Keypad / Touch Sensor Fault

Display shows E14 and the unit may not respond to temperature adjustments.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Damaged touch control overlay, Liquid intrusion into keypad area, Loose keypad ribbon cable, Failed keypad circuit on user interface board

How to Fix / Troubleshooting

Safety: Unplug the wine cooler before removing the control panel.

Steps:

  • 1. Clean control surface: Wipe the touch panel with a slightly damp cloth and then dry thoroughly. Sticky residue can interfere with capacitive touch sensors.
  • 2. Power reset: After cleaning, leave the unit unplugged for 5 minutes, then reconnect and test the keys.
  • 3. Access keypad ribbon: Remove the control panel trim and inspect the ribbon cable connecting the keypad to the user interface board. Reseat it carefully.
  • 4. Replace keypad or UI board: If certain keys never respond or E14 persists, replace the touch control panel or the entire user interface assembly with the correct Electrolux part.

Professional help: If replacing the keypad does not resolve the issue, the main control board may be misinterpreting key signals and should be checked by a technician.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Touch Control Panel / User Interface Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements