Wine cooler shows E15 and may shut down cooling as a protective measure.

Safety: Unplug the unit before cleaning or accessing the rear compartment. Coils and compressor may be hot.

Steps:

• 1. Check installation: Ensure adequate clearance around the wine cooler per Electrolux specifications. Do not enclose tightly in cabinetry without ventilation.
• 2. Clean condenser coils: Remove the rear access panel and use a soft brush and vacuum to remove dust and lint from the condenser coils and surrounding area.
• 3. Verify condenser fan operation: With power restored briefly, confirm that the condenser fan runs whenever the compressor runs. If not, unplug and test/replace the fan motor.
• 4. Reduce ambient temperature: If the unit is in a garage or near an oven, relocate it to a cooler, more stable environment.

Note: If E15 persists after cleaning and ensuring proper airflow, the overheat sensor or control board may be faulty and should be evaluated by a technician.