Wine cooler displays E7 and interior fan may not run or runs erratically.

Safety: Unplug the unit before removing interior panels. Fan blades can start unexpectedly if power is applied.

How to check:

• 1. Listen for fan operation: With the door closed and unit running (before unplugging), listen for the evaporator fan. If silent or noisy, suspect a fan issue.
• 2. Access fan: Remove interior shelves and the rear inner panel to expose the evaporator fan assembly.
• 3. Inspect for ice or obstruction: Look for frost or ice blocking the fan. If present, defrost the unit completely by unplugging and leaving the door open for 24 hours. Address underlying defrost issues if ice returns.
• 4. Check wiring: Ensure the fan connector is fully seated and wires are not pinched or broken.
• 5. Test fan motor: With the unit unplugged, measure resistance across the fan motor leads. An open circuit indicates a failed motor. If you have a suitable low-voltage DC source (for DC fans), you can bench-test the motor.
• 6. Replace fan motor: Remove mounting screws, swap in the new Electrolux evaporator fan motor, and ensure the blade spins freely and is correctly oriented.

Professional help: If the fan motor is good but not receiving power, the main control board may be at fault and should be checked by a technician.