Wine cooler not cooling at all; interior is at room temperature and compressor is not running.

Safety: Unplug the wine cooler before removing any panels or touching wiring.

Steps:

• 1. Verify power: Confirm the outlet has power and the unit is switched on. Check the household breaker.
• 2. Check control settings: Ensure the temperature is not set to the warmest setting or in demo mode. Try lowering the set temperature.
• 3. Listen for activity: When powered, listen for any humming or clicking from the rear. Silence suggests the compressor is not being energized.
• 4. Inspect compressor start components: Remove the rear access panel and inspect the Electrolux start relay and overload on the compressor. Replace if burnt or cracked.
• 5. Check wiring and thermal fuse: Look for any inline thermal fuse or cut-out in the compressor circuit and test for continuity if accessible.

Professional service: If the compressor still does not start after replacing the start device and verifying power, the main control board or compressor may be faulty. A technician should perform further diagnosis.