EuroCave
Overheating Condenser or Insufficient Ventilation
Cabinet exterior is unusually hot to the touch, especially on the sides or top.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Built-in installation without proper clearances, Severely clogged condenser coil, Condenser fan failure, Ambient temperature too high
How to Fix / Troubleshooting
Safety first: Unplug the unit before cleaning or moving it.
- Step 1 – Check installation: Ensure the cabinet has the clearances specified by EuroCave for built-in or free-standing use. Do not block ventilation grilles.
- Step 2 – Clean condenser: Remove the rear lower panel and clean the condenser coil thoroughly.
- Step 3 – Verify condenser fan: Confirm the fan runs when the compressor is on. Replace the fan motor if it does not operate.
- Step 4 – Evaluate room temperature: Move the unit to a cooler location if the ambient temperature exceeds the rated class for your model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Coil / Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements