Intermittent clicking noise with brief compressor attempts but no sustained running.

Safety first: Unplug the unit before accessing the compressor area.

• Step 1 – Improve ventilation: Ensure adequate clearance around the cabinet and clean the condenser coil to reduce compressor load.
• Step 2 – Check supply voltage: Avoid using extension cords; plug directly into a dedicated outlet. Have an electrician verify voltage if suspected low.
• Step 3 – Replace start relay/PTC: Remove and inspect the compressor start device. Replace it with the correct EuroCave part if there are signs of overheating or if it rattles when shaken.
• Step 4 – Allow compressor to cool: Leave the unit unplugged for several hours to let the compressor cool, then retry. Persistent short cycling after relay replacement suggests a failing compressor.
• Step 5 – Call technician: A compressor drawing excessive current or failing mechanically requires professional replacement.