Fagor
No Power / Power Supply Failure
Wine cooler is completely dead; no lights, no display, no sound.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on main PCB, Faulty power cord or plug, Tripped household breaker, Failed power supply section of main control board
How to Fix / Troubleshooting
Safety: Ensure the outlet is de-energized or unplug the unit before opening any panels. Mains voltage is dangerous.
Steps:
- Check outlet: Plug another device into the same outlet to confirm power. Reset any tripped breakers or GFCI outlets.
- Inspect power cord: Look for cuts, burns, or kinks. Replace the cord if damaged.
- Access main PCB: Remove the rear panel to reach the control board. Look for an onboard fuse (glass or ceramic). Test continuity with a multimeter; replace with the same rating if blown.
- Inspect board: Look for burnt components or cracked solder joints in the power supply area.
- Replace main PCB: If the fuse is good but there is still no power, the power supply section of the board is likely faulty. Replace the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements