Fisher & Paykel
High Cabinet Surface Temperature
Exterior sides or top of the wine cooler feel very hot to the touch.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Condenser loop in cabinet walls operating at high load, blocked ventilation, high ambient temperature, condenser fan failure
How to Fix / Troubleshooting
Safety: Surfaces may be hot but should not be scalding. Unplug before removing panels.
Steps to address:
- Check ventilation: Ensure recommended clearances around the unit are maintained and that grills are not blocked.
- Clean condenser: Remove rear panel and clean condenser coil.
- Verify condenser fan: Confirm the fan runs with the compressor. Replace if not operating.
- Monitor: Some warmth on cabinet sides is normal due to condenser tubing, but excessive heat after cleaning and fan repair may indicate a sealed system issue requiring professional service.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements