Frigidaire
Air Infiltration or Defrost System Issue
Excessive frost or ice buildup on the back wall or around bottles.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Damaged door gasket, door not closing fully, failed defrost heater or sensor (on frost-free models)
How to Fix / Troubleshooting
Safety: Unplug the unit before defrosting or accessing internal components.
Steps:
- Inspect door gasket: Look for tears, gaps, or hardened sections. Close the door on a sheet of paper; if it pulls out easily, the seal is weak.
- Adjust door: Ensure hinges are tight and the door is aligned so it closes evenly.
- Manual defrost: Turn off and unplug the cooler. Leave the door open and place towels to catch water. Do not chip ice with sharp tools.
- Restart and monitor: After all ice has melted, restart the unit and monitor for recurring frost.
- Defrost system check: If frost quickly returns on a frost-free model, the defrost heater or sensor may be faulty and should be tested and replaced as needed.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements