Wine cooler runs constantly and is too warm inside.

Safety: Unplug the appliance before cleaning or removing panels.

Steps:

• Check installation clearance: Ensure there is adequate space around the cooler (typically at least 2–3 inches at the back and sides) for ventilation.
• Clean condenser: Remove the rear grille if present and vacuum dust and lint from the condenser coils. Use a soft brush to avoid bending fins.
• Verify condenser fan: With the unit plugged in and running, confirm that the fan near the compressor is spinning. If not, unplug and inspect for obstructions or a seized motor.
• Replace fan motor if needed: Install a Frigidaire condenser fan motor assembly if the motor is not running with proper voltage.
• Re-test cooling: After cleaning and repairs, allow 12–24 hours for the temperature to stabilize.