CF
GE
Condenser Fan Fault (if equipped)
Display shows CF and the interior fan may not operate correctly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, obstructed fan blade, loose fan wiring connector, defective control board fan output
How to Fix / Troubleshooting
Safety: Unplug the wine cooler before accessing the rear compartment.
- Access fan: Remove the rear lower panel to expose the condenser fan near the compressor and condenser coil.
- Check for obstructions: Remove dust, debris, or packaging material blocking the fan blade. Ensure the blade spins freely by hand.
- Inspect wiring: Confirm the fan motor connector is secure and wires are not damaged.
- Test fan motor: With the unit unplugged, measure motor resistance. An open circuit indicates a failed motor. Replace the condenser fan motor if defective.
- Control board: If the fan motor is good but never receives power when the compressor runs, replace the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements