Display shows F2 and the lower zone of a dual-zone Ivation wine cooler does not cool correctly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed lower zone thermistor, Damaged sensor harness, Loose connector on control board

Safety: Disconnect power before working inside the cabinet.

Steps:

Locate lower zone sensor: Remove shelves from the lower compartment and locate the sensor on the rear or side wall, or behind an interior panel.
Inspect wiring: Check for pinched or broken wires and ensure the connector is secure at the control board.
Test and replace: Measure resistance; if out of spec, replace with a compatible Ivation lower zone temperature sensor.

Reassemble and verify that F2 clears and the lower zone maintains set temperature.

Medium 3/5

Lower Zone Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.