E10
JennAir
User Interface / Touch Control Failure
Wine cooler displays E10 and the unit may not respond to temperature changes or button presses.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed touch control panel, Loose ribbon cable between UI and main board, Moisture intrusion into control panel, Faulty main control board interface circuit
How to Fix / Troubleshooting
Safety: Unplug the unit before removing the control panel.
Steps:
- Inspect for moisture: Check around the control panel for signs of condensation or liquid spills. Dry the area thoroughly.
- Remove control panel: Carefully pry off or unscrew the front control panel per the service manual.
- Check ribbon cable: Ensure the flat ribbon cable or harness between the user interface and main control board is fully seated and not damaged. Reseat both ends.
- Visual inspection: Look for corrosion or burn marks on the UI board. If present, replace the UI assembly.
- Test operation: Restore power and test buttons. If E10 persists and buttons are unresponsive, replace the user interface panel.
- Control board: If a new UI does not resolve the issue, the main control board may be at fault and should be replaced by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Control Panel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements