Kismile Display Power or PCB Failure

Display is completely blank but the interior light may still work.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown low-voltage fuse on control board, Failed display PCB, Loose display power connector, Power surge damage

Safety: Unplug the wine cooler before accessing the control board.

Check outlet: Confirm the wall outlet has power by plugging in another device.
Inspect control board: Remove the rear or top panel to access the main control board. Look for a small fuse; test and replace with the same rating if blown.
Check display connector: Ensure the harness from the main board to the display PCB is fully seated.
Replace display PCB: If power is present but the display remains blank, replace the Kismile display board.

Medium 3/5

Display Control Board

Check Price on Amazon

We may earn a commission from links on this page.