Wine cooler door gasket is torn, cracked, or not sealing

Safety: Door may be heavy; support it if removing for gasket replacement.

• Step 1 – Inspect entire gasket: Run your fingers around the gasket to feel for cracks or gaps.
• Step 2 – Order correct part: Use the KitchenAid model number to obtain the exact replacement gasket.
• Step 3 – Remove old gasket: Gently pull the gasket out of its retainer channel around the door.
• Step 4 – Install new gasket: Press the new gasket into the channel, starting at the corners. Ensure it is fully seated and not twisted.
• Step 5 – Warm and form: Close the door and use a hair dryer on low to soften the gasket, then press it against the cabinet to form a good seal.