Temperature displayed on the control panel does not match an independent thermometer placed inside the cabinet.

Safety: Unplug the unit before moving sensors or panels.

Steps:

• 1. Verify measurement: Place a reliable thermometer in the center of the cabinet away from walls and door. Allow several hours for stabilization.
• 2. Check sensor placement: Ensure the cabinet sensor is mounted in its original location and not touching the evaporator or walls.
• 3. Replace sensor if needed: If the displayed temperature is consistently off by several degrees and the sensor is old, replace the La Sommeliere cabinet NTC sensor.
• 4. Adjust setpoint: If no calibration function exists, compensate by adjusting the setpoint up or down to achieve the desired actual temperature.