Door does not close properly or pops open slightly after closing.

No electrical work is needed, but ensure the unit is stable before adjusting the door.

• 1. Check for obstructions:
  • Ensure shelves, bottles, or racks are not protruding and hitting the door.
• 2. Inspect gasket:
  • Look for twisted or deformed sections of the door gasket.
  • Warm the gasket gently with a hair dryer and reshape if needed.
• 3. Level the cabinet:
  • Adjust leveling legs so the door naturally swings closed.
• 4. Adjust hinges:
  • Loosen hinge screws slightly and realign the door so it sits square in the opening.
  • Tighten screws securely.
• 5. Replace gasket if damaged:
  • Install a new Lanbo door gasket if the old one is torn or hardened.