Water pooling at the bottom of the wine cooler or leaking onto the floor.

Unplug the cooler before removing interior panels.

• 1. Level the unit:
  • Use a level to ensure the cooler is slightly tilted back so water flows to the drain.
  • Adjust the front leveling legs as needed.
• 2. Clear the defrost drain:
  • Remove the interior rear panel to access the drain trough.
  • Use a pipe cleaner or flexible brush to clear the defrost drain hole.
  • Pour a small amount of warm water down the drain to confirm it flows to the pan.
• 3. Inspect drain tube and pan:
  • From the rear, check the drain tube for kinks or cracks.
  • Ensure the drain pan above the compressor is properly positioned.
• 4. Replace damaged parts:
  • Install a new Lanbo drain tube if cracked or leaking.