Maytag Display Module or Low-Voltage Supply Issue

Digital display is dim, flickering, or segments are missing.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failing display PCB, Loose display connector, Weak low-voltage regulator on main board, Heat damage behind panel

Safety: Unplug the cooler before accessing the display.

1. Check for heat sources: Ensure the cooler is not installed near an oven or direct sunlight that could overheat the control area.
2. Reseat display connectors: Remove the control panel and firmly reconnect the display harness.
3. Inspect display PCB: Look for burnt or cracked solder joints. Replace the display module if damaged.
4. Evaluate main board: If multiple low-voltage functions are weak, replace the main control board.

Medium 3/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.