Monogram
Short Cycling Due to Overload or Control Fault
Wine cooler starts then shuts off after a few seconds; this repeats frequently.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Compressor overload protector tripping, Faulty start device, Low or high line voltage, Main control board rapidly cycling compressor
How to Fix / Troubleshooting
Safety: Unplug the unit before touching compressor or electrical parts. Components may be hot.
- Check line voltage: Use a multimeter or have an electrician verify stable voltage at the outlet.
- Inspect start device: Remove the compressor terminal cover and inspect the start relay/overload for burn marks or rattling. Replace if suspect.
- Allow cooling: If the compressor is very hot, let it cool for an hour, then try again. Persistent overload tripping suggests compressor or start component issues.
- Control board: If the compressor is being switched on and off rapidly by the board (audible relay clicking), replace the main control board.
Short cycling can quickly damage the compressor; seek professional service if basic checks do not resolve it.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Compressor Start Device
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements