Montpellier
No Power / Power Supply Failure
Wine cooler will not power on at all, display and light off
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on main PCB, Faulty power cord, Tripped household circuit breaker, Failed power supply section on control board
How to Fix / Troubleshooting
Safety: Unplug the unit before inspecting the cord or opening any panels. Only qualified persons should replace fuses on PCBs.
- Check outlet: Test the wall socket with another appliance to confirm it has power. Reset any tripped breakers or RCDs.
- Inspect power cord: Look for cuts, kinks, or burn marks. Replace the cord if damaged, using a compatible Montpellier or equivalent rated cord.
- Rear fuse: Some models have an accessible fuse near the power entry. If present, remove and check continuity. Replace only with the same type and rating.
- Internal fuse/PCB: If there is no external fuse and the unit is still dead, the internal power supply or PCB fuse may have failed. This requires opening the control housing and should be done by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board / Power Cord
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements