Vibration transmitted to cabinetry or floor; bottles rattle when compressor runs.

Safety: No internal electrical work is required; unplug if moving the unit.

• Leveling: Use a spirit level and adjust the front feet until the unit is stable and does not rock.
• Spacing: Ensure the cooler is not hard-pressed against cabinets or walls; leave a small gap to prevent vibration transfer.
• Internal layout: Reposition bottles and ensure shelves are fully seated in their tracks.
• Check rear components: Inspect the condenser coil and drip tray to ensure they are not touching the cabinet. Bend or pad as needed.