E6
NEEDONE
Evaporator Fan Motor Fault
Display shows E6 and the fan noise may be abnormal or airflow seems weak.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed evaporator fan motor, Ice obstructing fan blades, Loose fan wiring harness, Faulty fan driver circuit on main control board
How to Fix / Troubleshooting
Safety first: Disconnect power before opening any panels.
- Listen for fan: With the unit powered (before unplugging), note whether you hear the internal fan running when the compressor is on. Then unplug.
- Access evaporator fan: Remove shelves and the rear interior panel in the cooling compartment to expose the evaporator and fan assembly.
- Check for ice or obstruction: Look for ice buildup around the fan or objects that may have fallen into the fan shroud. Clear any obstruction and fully defrost if necessary.
- Inspect wiring: Ensure the fan motor connector is firmly seated and wires are not damaged.
- Replace fan motor: If the fan blades spin freely by hand but do not run when powered, replace the evaporator fan motor with the correct NEEDONE motor assembly.
- Reassemble and test: Reinstall the panel, restore power, and verify that the fan runs and the E6 code clears.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements