NutriChef Compressor Hard Start / Start Device Failure

Clicking sound from compressor area; compressor tries to start but shuts off repeatedly and no cooling occurs.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed compressor start relay, Weak overload protector, High starting torque due to compressor wear, Low line voltage

How to Fix / Troubleshooting

Safety: Unplug the cooler before accessing the compressor. High voltage is present.

Steps:

  • 1. Check voltage: Ensure the outlet provides stable voltage within specification. Avoid long extension cords.
  • 2. Access start components: Remove the rear panel and compressor terminal cover. Inspect the start relay and overload for burn marks or rattling.
  • 3. Test components: Use a multimeter to check continuity through the overload and relay. Replace any open or visibly damaged parts with NutriChef-compatible components.
  • 4. Evaluate compressor: If new start components do not resolve the issue, the compressor may be mechanically locked and require professional replacement.
Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Compressor Start Relay and Overload Protector
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements