Interior light does not turn on when door is opened, but cooling works normally.

Safety: Unplug the cooler before working on the light circuit.

Steps:

• 1. Check light settings: Some NutriChef models allow manual light off via the control panel. Ensure the light is not disabled.
• 2. Test door switch: If the unit uses a mechanical switch, press it manually and see if the light comes on. For reed switches, observe if the door icon changes on the display.
• 3. Access LED module: Remove the interior light cover and inspect the LED board for burn marks or loose connections.
• 4. Replace LED module: If the LED board is faulty, install a compatible NutriChef LED light assembly.
• 5. Check wiring and board: If the LED is good but no power is present at its connector, the main control board light driver may be defective and require replacement.