NutriChef No Power / Dead Unit

Wine cooler will not power on; display is blank and no lights or sounds.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown internal fuse on control board, Faulty power cord, Failed main control board power supply, Tripped household breaker or bad outlet

How to Fix / Troubleshooting

Safety: Unplug the unit before opening any panels. If you are not comfortable working with mains voltage, contact a technician.

Steps:

  • 1. Check outlet and breaker: Test the outlet with another device. Reset any tripped breakers or GFCI outlets.
  • 2. Inspect power cord: Look for visible damage. If damaged, replace the cord with a compatible NutriChef power cord.
  • 3. Access control board: Remove the rear panel to locate the main control board. Look for an onboard fuse; test it with a multimeter and replace if blown with the same rating.
  • 4. Examine board: Check for burnt components or cracked solder joints. If the board shows damage or no low-voltage output, replace the main control board.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Main Control Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements