Water pooling at the bottom of the cabinet or leaking onto the floor in front of the wine cooler.

Safety first: Unplug the cooler before working inside. Wipe up any standing water to prevent slipping.

• Level the unit: Use a spirit level to ensure the cooler is slightly tilted back so water flows to the rear drain. Adjust front leveling feet as needed.
• Locate and clear drain: Inside the cabinet, find the small drain hole under the evaporator panel. Use a soft brush, cotton swab, or pipe cleaner to remove debris. Flush with warm water.
• Check rear drain tube: From the back, locate the drain tube leading to the drip tray above the compressor. Ensure it is connected, not kinked, and not cracked. Replace the "Drain tube" if damaged.
• Inspect drip tray: Make sure the tray is properly seated and not overflowing. Clean any mold or debris.
• Gasket inspection: Replace a leaking "Door gasket" to reduce excess condensation.