Door does not close properly or pops open slightly after being shut.

Safety first: Unplug the unit before adjusting hinges to avoid accidental fan or compressor operation while working.

• 1. Level the cabinet: Adjust leveling legs so the unit is slightly tilted back. This helps the door close and stay shut.
• 2. Inspect hinges: Check upper and lower hinges for looseness or sagging. Tighten hinge screws.
• 3. Adjust door position: Loosen hinge screws slightly and adjust the door so it is square with the cabinet, then retighten.
• 4. Check gasket: Inspect the gasket for deformation. Use warm water to soften and reshape minor distortions. Replace if torn or permanently warped.
• 5. Remove obstructions: Ensure shelves or bottles are not protruding and hitting the door from inside.

Note: Proper door closure is critical for maintaining temperature and preventing frost.