Siemens No Power to Control / Dead Main PCB

Display is completely blank; wine cooler does not respond, but mains outlet has power.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown internal fuse on main PCB, Faulty power supply section, Damaged power cord, Loose mains connector

Safety first: Unplug the appliance before opening any covers. Internal components carry dangerous voltages.

Steps to diagnose:

Check outlet and cord: Test the outlet with another device and inspect the power cord for damage.
Inspect main PCB: Remove the rear panel and locate the main control board. Look for an accessible fuse; if blown, investigate cause before replacing.
Board replacement: If the fuse blows again or the board shows burn marks, replace the main control PCB.

Hard 4/5

Main Control PCB / Power Cord

Check Price on Amazon

We may earn a commission from links on this page.