Door does not close properly or pops open slightly after being shut.

Safety first: Unplug the unit before adjusting hinges. Doors can be heavy; support the door while loosening screws.

Steps to correct door closure:

• 1. Level the cabinet: Adjust leveling feet so the front is slightly higher than the rear; this helps the door close by gravity.
• 2. Inspect hinges: Check upper and lower hinges for looseness or bending. Tighten hinge screws and replace bent "door hinge" parts if necessary.
• 3. Examine gasket: Look for twisted or hardened sections. Warm the gasket gently with a hair dryer and reshape it to improve sealing. Replace the "door gasket" if it remains deformed.
• 4. Check for obstructions: Ensure shelves or bottles are not interfering with the door closing fully.