Excessive condensation or water droplets forming on the inside glass door and walls.

Safety first: Unplug the unit if removing interior panels. Water on the floor can be slippery; wipe spills promptly.

Steps to reduce condensation:

• 1. Check door gasket: Inspect for gaps, tears, or hardened sections. Replace the "STAIGIS door gasket" if it does not seal evenly.
• 2. Limit door openings: Minimize how often and how long the door is open, especially in humid environments.
• 3. Clear drain channel: Remove the rear interior panel and locate the drain trough under the evaporator. Use a soft brush or pipe cleaner to clear any blockage in the drain hole.
• 4. Verify temperature setting: Ensure the set temperature is appropriate; very low settings can increase condensation on glass.