EC37

Sub-Zero Fan Speed Control Fault

Wine cooler displays EC37 and may have issues with fan speed control; fans may run at incorrect speeds or be noisy.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed variable‑speed fan motor, Faulty fan driver circuit on control board, Damaged fan wiring, Obstruction causing fan overload

How to Fix / Troubleshooting

Safety first: Disconnect power before accessing fans. Keep fingers clear of blades when testing.

Step 1 – Listen and observe

Note whether fans run too fast, too slow, or cycle erratically.
Check for unusual noises indicating mechanical obstruction.

Step 2 – Inspect fan area

Remove interior or rear panels to access the affected fan.
Clear any debris or ice from around the blades.

Step 3 – Replace fan motor

If the fan is noisy, stiff, or does not respond to control changes, replace it with the correct Sub‑Zero variable‑speed fan motor.

Step 4 – Control board

If a new fan does not resolve EC37, the fan driver on the control board may be defective and require board replacement.

Repair Difficulty

Medium 3/5

Required Part

Variable-Speed Evaporator Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.